GCCC Dashboard

Contest Lifecycle

New Contest

Contest Name Contest Type Year Location / Site Station Callsign Category Contest Start (UTC) Contest End (UTC) Notes

Contests

Loading…

Station Setup

Add one row per operating position. The Station Name must match the NetBios/PC name configured in N1MM (shown in packets as StationName). This maps the PC name to a human-readable position label and records the rig/antenna setup.

Contest N1MM Station Name (NetBios) Position Label Rig Antenna Bands Note

Remote Operators

Club members operating from their own shacks can feed their QSOs into this dashboard by pointing N1MM's UDP broadcast at the Pi's public IP.

N1MM Broadcast Data Setup

In N1MM go to Config → Configure Ports → Broadcast Data
Check Contacts and Score
Set the IP address to your router's public IP : 12060
On your router, port-forward UDP 12060 → 192.168.4.187
Make sure the contest is set to Live in this admin panel before operators start logging
Each operator's PC NetBIOS name will appear as a separate station on the dashboard — add them in Station Setup above

The Pi's public IP can be found at whatismyip.com from any device on this network.

Import Log

Import a completed or in-progress log from another operator. Supports ADIF (.adi / .adif) and Cabrillo (.log / .cbr). Existing QSOs are matched by ID and updated, not duplicated.

Select Contest & Upload

Contest

Open ADIF Import Open Cabrillo Import

Opens in a new tab — select your file and click Upload.